Name: LMB..LUU Series
Rating: 5 (99 reviews)

LMB..LUU Series

The LMB..LUU series double-wide linear ball bearing is a high-performance mechanical component designed to withstand higher loads and provide smooth motion. Its unique double-width construction increases the bearing's stability and load-carrying capacity, making it suitable for demanding industrial applications. The shell of this series of bearings is made of high-quality materials, has good wear resistance and corrosion resistance, and is suitable for use in various environments. Built-in rolling balls reduce friction and improve operating efficiency. LMB..LUU bearings are also easy to install and maintain and are widely used in automation equipment, printers, medical equipment and other precision machinery to help achieve precise linear motion and ensure system reliability and durability.

Send inquiry

Double-wide design

Increased length-to-diameter ratio provides higher load capacity and improved moment resistance compared to standard single-width linear bearings.

LUU sealing system

Equipped with dual lip seals on both ends, the LUU configuration effectively retains lubricant and prevents ingress of contaminants in transmission environments.

Ball circulation circuit

Precision-machined ball tracks and recirculation channels ensure smooth, low-friction linear motion with consistent rolling resistance.

Transmission specific

Engineered to withstand the oscillatory motion and variable load conditions found in automatic transmission shift mechanisms and valve body applications.

Technical specifications

Bore diameter (inch)0.250 - 0.750 in

Outer diameter0.500 - 1.250 in

Length (double-wide)0.875 - 2.000 in

Dynamic load capacity130 - 900 N

Static load capacity200 - 1400 N

Seal typeLUU (dual-lip nitrile)

Operating temperature-20°C to +100°C

Ball materialGCr15 / SAE 52100

Typical transmission applications

Shift fork guides

Linear guidance for shift forks in automatic transmission valve bodies.

Valve spool supports

Bearings for hydraulic valve spools requiring precise axial motion.

Park lock mechanisms

Guiding components in parking lock actuators with intermittent motion.

Clutch actuator guides

Supporting linear motion in clutch control and engagement systems.

◈

Installation guidance

Press the bearing into the housing using a mounting tool that contacts the outer ring. Ensure shaft surface roughness Ra ≤ 0.2 µm for optimal performance.

◈

Lubrication

Pre-lubricated with transmission-compatible grease. Relubrication interval depends on stroke frequency and environmental contamination level.

◈

Storage

Store in original packaging in a clean, dry environment. Avoid exposure to solvents or extreme temperature fluctuations.

◈

Shaft hardness

Recommended shaft hardness: 60-64 HRC for extended service life and consistent linear accuracy.

Bearing Number			Nominal shaft diameter		dr			Major dimensions and tolerance											Eccentricity(Inch/μm)	Basic load rating(kN)
LMB…UU	Ball circuit	Weight(Kg)	Inch	mm	Inch	Tolerance(Inch)	Tolerance(μm)	D(Inch/mm)	D Tolerance（inch）	D Tolerance（(μm）	L(Inch/mm)	L Tolerance(inch)	L Tolerance(μm)	B(Inch/mm)	B Tolerance(Inch)	B Tolerance(μm)	W(Inch/mm)	D1(Inch/mm)	Eccentricity(Inch/μm)	Dynamic	Static
LMB4L	4	17.5	1/4	6.35	.2500/6.350	0/-.00040	0/-10	.5000/12.700	0/-.00050	0/-13	1.3750/34.925	0/-.012	0/-300	1.0220/25.959	0/-.012	0/-300	.0390/0.992	.4687/11.906	.0006/15	323	530
LMB6LUU	4	28	3/8	9.525	.3750/9.525	0/-.00040	0/-10	.6250/15.875	0/-.00065	0/-16	1.5938/40.481	0/-.012	0/-300	1.2716/32.298	0/-.012	0/-300	.0390/0.992	.5880/14.935	.0006/15	353	630
LMB8LUU	4	80	1/2	12.7	.5000/12.700	0/-.00040	0/-10	.8750/22.225	0/-.00065	0/-16	2.3750/60.325	0/-.012	0/-300	1.9250/48.895	0/-.012	0/-300	.0459/1.168	.8209/20.853	.0006/15	813	1
LMB10LUU	4	160	5/8	15.875	.6250/15.875	0/-.00040	0/-10	1.1250/28.575	0/-.00065	0/-16	2.8125/71.438	0/-.012	0/-300	2.2079/56.080	0/-.012	0/-300	.0559/1.422	1.0590/26.899	.0006/15	1230	2350
LMB12LUU	5	195	3/4	19.05	.7500/19.050	0/-.00050	0/-12	1.2500/31.750	0/-.00075	0/-19	3.0937/78.581	0/-.012	0/-300	2.3314/59.218	0/-.012	0/-300	.0559/1.422	1.1760/29.870	.0008/20	1370	2740
LMB16LUU	6	410	1	25.4	1.0000/25.400	0/-.00050	0/-12	1.5625/39.688	0/-.00075	0/-22	4.2831/108.744	0/-.016	0/-400	3.5049/89.139	0/-.016	0/-400	.0679/1.727	1.4687/37.306	.0008/20	1570	3140
LMB20LUU	6	820	1-1/4	31.75	1.2500/31.750	0/-.00060	0/-15	2.0000/50.800	0/-.00090	0/-22	5.0000/127.000	0/-.016	0/-400	4.0094/101.839	0/-.016	0/-400	.0679/1.727	1.8859/47.904	.0010/25	2500	5490
LMB24LUU	6	1250	1-1/2	38.1	1.5000/38.100	0/-.00060	0/-15	2.3750/60.325	0/-.00090	0/-22	5.6875/144.463	0/-.016	0/-400	4.8236/122.519	0/-.016	0/-400	.0859/2.184	2.2389/56.870	.0010/25	3430	840
LMB32LUU	6	1350	2	50.8	2.0000/50.800	0/-.00060	0/-15	3.0000/76.200	0/-.00100	0/-25	7.7500/196.850	0/-.016	0/-400	6.3834/162.138	0/-.016	0/-400	.1029/2.616	2.8379/72.085	.0012/30	680	15900

LMB..LUU Series

Submit feedback